ТU 28.14.13-007-63887518-2021

Product designation structure when ordering

Product purpose

The alarm deluge valve "Sputnik" according to TU 28.14.13-007-63887518-2021 is intended to release water or an aqueous solution of a fire extinguishing agent in automatic water and foam fire extinguishing systems.

Product Description

The alarm deluge valve "Sputnik" is a fast acting isolation valve. The product is delivered in full factory readiness with all the necessary piping: a manual start valve, drain valves, a check valve, a filter element, an electromagnetic valve, a flow indicator, pressure gauges and other equipment in accordance with the technical specifications.

Advantages:

• the design of this model ensures low pressure losses;
• valve trim consists of domestic components;
• automatic closing of the valve after the end of the fire extinguishing;

Valve application conditions

•working environment – water and water solutions of fire extinguishing agents;
• type of climatic version - UHL4 according to GOST 15150-69 (heated room);
• operation areas – explosion-proof

Specifications

The valve is manufactured with a nominal diameter of 50, 65, 80, 100, 150, 200, 250, 300 mm and a maximum working pressure of 1.6 MPa.

Automatic fire fighting Unit is intended for storage of a foam concentrate, preparation of an aqueous solution of a foam concentrate and supply of the finished solution to the foam fire extinguishing system of the facility where the product is installed.

All products are manufactured in the company's own workshops, undergo independent verification and own tests for compliance with technical specifications, and have the necessary certificates of conformity.

The emergency discharge fire valve is designed to discharge into the drainage system or into a container spilled flammable and explosive liquids due to emergency or other unforeseen situations.

Robotic Fire Monitor is intended for direct operational extinguishing of a fire that has arisen, as well as for cooling technological equipment and installations.

The fire extinguishing unit (camera) is designed for fire extinguishing and refueling of mobile fire equipment.

The dosing tank is designed to store the foaming agent concentrate and dispense it in the required percentage into the water stream.

The pressure regulator is designed to automatically regulate pressure, differential pressure, flow, level and ratio of these parameters by changing the flow rate of the working medium and is controlled directly by the energy of the working medium, without using an external energy source.

Transformer substations and parts of electrical distribution or regulating equipment are electrical installations designed for the conversion and distribution of electricity. Substations are designed for receiving, converting and distributing electricity.

Filtration and separation systems protect pumping units, hydraulic and pneumatic actuators, shut-off and control devices and other equipment. The system is designed to purify liquid and/or gaseous working medium from mechanical impurities of various nature.

The small-sized sewage installation is designed for pumping domestic wastewater into the central sewer system.

Filtration and separation systems protect pumping units, hydraulic and pneumatic actuators, shut-off and control devices and other equipment. The system is designed to purify liquid and/or gaseous working medium from mechanical impurities of various nature.